Square Ring Gasket for PMC GHO Pump by Polyurethane Machinery Corporation (PMC)
Instructions for use:
Make sure the Gasket (part No. PU-04000-40) is in place on the threaded end of the adaptor and screw the Bung Adaptor tightly into the bunghole of the drum. With the second gasket in place, insert the Transfer Pump through the adaptor and lock it in place.
Use thread sealer on the male threads of the Air Needle Valve and Quick Disconnect Plug
Use thread sealer on the male outlet fitting (not supplied as part of the pump assembly) and thread the fitting into the outlet port.
Install air lines as required. PMC recommends using a 3/8” ID or larger air line to deliver air to the transfer pump.
Connect ground wire to the Grounding Lug in accordance with National, State and Local Electrical Codes.